200 €*
EnelX
Enel Sun Plug And Play - Ringhiera con Autoportante
You can save 20% on your energy consumption**
, €
€
Curbside delivery and VAT included.
-
Enables the production of renewable energy for your home
-
Easy to install
System dimensions: 1664 x 977.8 x 702.5 mm. We recommend reviewing the instruction manual before purchase. For masonry parapets, minimum thickness: 110 mm, maximum thickness: 270 mm. For parapets with metal railings, minimum thickness: 30 mm, maximum thickness: 150 mm. Requirement: railing must withstand a horizontal force of at least 200 kg/m. Otherwise, it is mandatory to purchase the free-standing support kit. For parapets with self-supporting metal railings, minimum thickness: 50 mm, maximum thickness: 170 mm. Requirements: railing must withstand a horizontal force of at least 200 kg/m and be installed on reinforced concrete; otherwise, it is mandatory to consult a technician.
-
Wind tunnel tested to withstand up to 130 km/h
-
Connects to the grid via a standard power plug.
The dedicated power socket must comply with the requirements set out in standard CEI 0-21.
The Customer acknowledges and agrees that the installation of Enel-branded products must be carried out in accordance with the instructions provided in the relevant installation manual.
Maximum handrail width: 150 mm.
ENEL SUN PLUG&PLAY photovoltaic system with a nominal power of 0.37 kWp, guaranteed for 10 years. Ideal for those who want a photovoltaic system but live in an apartment. Simple and quick to install on your balcony, it connects to the grid via a power plug with a dedicated outlet that complies with the CEI 0-21 standard, allowing immediate savings on household electricity consumption.
show-more +
*Offer valid until 30/09/2025 unless extended or while supplies last. **Estimated savings based on the behavior of a typical family with annual consumption of 2,300 kWh and Enel Sun Plug&Play system production of approximately 470 kWh per year (assumes south-facing exposure and 95% efficiency).
Description
Enel Sun Plug&Play Apartment Photovoltaic System – 0.37 kWp with 10-Year Warranty. Ideal for those who want a photovoltaic system but live in an apartment, the Enel Sun Plug&Play system offers a practical and efficient solution. With a nominal power of 300 Wp, it is quick and easy to install on your balcony. The system connects to your home’s power grid via a standard electrical plug with a dedicated socket that complies with CEI 0-21 regulations, allowing you to immediately start saving on your electricity consumption.
Included in the solution:
- 1 photovoltaic panel with a power output of 370 Wp (12-year conventional product warranty, 25-year performance warranty)
- Zucchetti/Tsun micro inverter with integrated monitoring system (10-year warranty)
- Support structure with railing bracket (10-year conventional warranty)
Monitoring
Thanks to a wattmeter installed in the system's protection panel, the system's production will be recorded and can be viewed at any time.
Required Conditions
- Availability of a dedicated and visually distinguishable electrical socket from the other sockets within the user's electrical system (where the qualified installer has provided a dedicated circuit from the distribution board).
- Type of railing: must be a metal railing not built according to the related technical standards and unable to support a horizontal load of at least 200 kg/m.
- The maximum width of the railing (including handrail) must not exceed 150 mm, with a useful parapet height between a minimum of 940 mm and a maximum of 1260 mm.
- Prior communication to the condominium regarding the installation of a photovoltaic system serving one's own apartment, on the railing/parapet of one's own balcony, supported by the legal provision in Article 1122 bis of the Italian Civil Code. A template for the prior notice to the condominium is available at this link.
- Once your system is installed, we invite you to contact or visit the website of your local electricity distributor to learn how to submit the Comunicazione Unica (attached to ARERA Resolution no. 315/2020/R/eel), which you can find at this link.
Specifications
|
SYSTEM |
PHOTOVOLTAIC MODULES |
|
Nominal power: 0.37 kWp |
|
|
Estimated energy output: 400 kWh |
Module nominal power: 370 Wp |
|
INVERTER |
Dimensions (W x L x D): 1.7690 mm x 1.052 mm x 30 mm |
|
Inverter manufacturer: Zucchetti/Tsun |
Weight 20.2 KG |
|
Inverter model: TSOL-M350 |
Module efficiency: 20,20 |
|
Maximum AC output power: 300 W |
STRUCTURE |
|
Maximum DC input power: 240-380 W |
Dimensions (W x L x D): 1.769 mm x 1.059 mm x 630 mm |
|
Inverter weight: 1,98 KG |
Weight: 15 kg |
|
Inverter dimensions: 178 mm x 153 mm x 28 mm |
|
|
Inverter efficiency: 96,7% |
|
Documents
Suggested for you