200 €*
EnelX
Enel Sun Plug And Play - Ringhiera Lunga
You can save 20% on your energy consumption**
, €
€
Curbside delivery and VAT included.
-
Enables the production of renewable energy for your home
-
Easy to install
System dimensions: 1664 x 977.8 x 702.5 mm. It is recommended to consult the instruction manual before purchasing. For masonry parapet, minimum thickness: 110 mm, maximum thickness: 270 mm. For parapet with metal railing, minimum thickness: 30 mm, maximum thickness: 150 mm. Requirement: railing capable of withstanding a horizontal force of at least 200 kg/m; otherwise, it is mandatory to purchase the self-supporting kit. For parapet with self-supporting metal railing, minimum thickness: 50 mm, maximum thickness: 170 mm. Requirements: railing capable of withstanding a horizontal force of at least 200 kg/m, installed on reinforced concrete; otherwise, it is mandatory to consult a technician.
-
Wind tunnel tested to withstand up to 130 km/h
-
Connects to the grid via a standard power plug.
The dedicated outlet must meet the requirements of the CEI 0-21 standard. The customer acknowledges and agrees that the installation of Enel-branded products must be carried out in accordance with the instructions in the installation manual.
Railing width between 75 mm and 120 mm. If wider, see the short railing offer.
ENEL SUN PLUG&PLAY 0.37 kWp photovoltaic system, guaranteed for 10 years. Ideal for those who want a photovoltaic system but live in an apartment. Quick and easy to install on your balcony, it connects to the grid via a standard electric plug with a dedicated socket that meets CEI 0-21 requirements, providing immediate savings on household electricity consumption.
show-more +
*Offer valid until 30/09/2025 unless extended or while supplies last. **Estimated savings based on the behavior of a typical family with annual consumption of 2,300 kWh and Enel Sun Plug&Play system production of approximately 470 kWh per year (assumes south-facing exposure and 95% efficiency).
Description
Apartment photovoltaic system Enel Sun Plug&Play 0.37 kWp, guaranteed for 10 years. Ideal for those who want a photovoltaic system but live in an apartment. Simple and quick to install on your balcony, it connects to the grid via a power plug with a dedicated socket that meets the requirements set out in standard CEI 0-21, allowing immediate savings on household electricity consumption.
The photovoltaic system has a nominal power of 300 Wp, and the solution includes:
- 1 photovoltaic module with 370 Wp power (Conventional Warranty: 12 years on the product and 25 years on performance)
- Zucchetti/Tsun Micro Inverter with integrated monitoring system (10-year warranty)
- Support structure equipped with railing bracket (Conventional Warranty: 10 years)
Monitoring
Thanks to a wattmeter installed in the system’s protection panel, the system’s production will be recorded and can be viewed at any time.
Required conditions
Availability of a dedicated power socket that is visually distinguishable from other sockets in the user's electrical system (where the qualified installer has provided a dedicated circuit from the distribution board)
Type of parapet with straight metal railing, built according to relevant technical standards, and capable of withstanding a horizontal force of at least 200 kg/m. If this is not verified, purchasing the self-supporting railing kit is mandatory.
The maximum width of the railing (including handrail) must be between a minimum of 75 mm and a maximum of 120 mm, with a maximum handrail height of 70 mm. If the thickness is between a minimum of 30 mm and a maximum of 75 mm, the long railing kit must be purchased.
Prior notification to the condominium regarding the installation of a photovoltaic system serving one’s own apartment, on the railing/parapet of one’s own balcony, in accordance with the legal provision set out in Art. 1122 bis of the Civil Code. A model for prior notification to the condominium is available at this link.
Once your system is installed, we invite you to contact or visit the website of your local distributor to learn how to submit the Single Notification (attached to ARERA Resolution No. 315/2020/R/eel), available at this link.
Specifications
|
SYSTEM |
PHOTOVOLTAIC MODULES |
|
Nominal power: 0.37 kWp |
|
|
Estimated energy output: 400 kWh |
Module nominal power: 370 Wp |
|
INVERTER |
Dimensions (W x L x D): 1,769 mm x 1,052 mm x 30 mm |
|
Inverter manufacturer: Zucchetti/Tsun |
Weight: 20.2 kg |
|
Inverter model: TSOL-M350 |
Module efficiency: 20.20% |
|
Maximum AC output power: 300 W |
STRUCTURE |
|
Maximum DC input power: 240–380 W |
Dimensions (W x L x D): 1,769 mm x 1,059 mm x 630 mm |
|
Inverter weight: 1.98 kg |
Weight: 15 kg |
|
Inverter dimensions: 178 mm x 153 mm x 28 mm |
|
|
Inverter efficiency: 96.7% |
|
Documents
Suggested for you